Installation Guide

Installation Instructions for

Pendant

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing compliant junctionNEC

boxes.

This product is safety listed for damp locations.

Incandescent version may be dimmed with a standard incandescent dimmer.

LED version may be dimmed with a LED dimmer. Consult lamp manufacturer

for additional information.

This instruction shows a typical installation.

CAUTION RISK OF FIRE-

This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and

operation of the product and the hazards involved.

Use minimum 90°c supply conductors.

7400 Linder Ave, Skokie, 160077IL

800.969.3347

www.generationlighting.com

The "Generation Lighting" graphic is a registered trademark of

Generation Lighting. Generation Lighting reserves the right to

change specifications for product improvements without notification.

SAVETHESE INSTRUCTIONS!

Perryton 4 and 8 Light Foyer

1.1

990P5_1500_-PER

5115004, 5115008, 5215004, 5315008

PAGE 1
Installation Instructions for 990P5_1500_-PER Perryton 4 and 8 Light Foyer 5115004, 5115008, 5215004, 5315008 1.1 CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Pendant Use minimum 90°c supply conductors. GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes.
PAGE 2
Install the Fixture 1A JUNCTION BOX 8 7 MOUNTING PLATE THREADED NIPPLE CANOPY COLLAR NUT SCREW COLLAR ASSEMBLY CHAIN 1 1 1 STEM 1 FIXTURE 2 10 LAMP 1 Determine the wanted height or look of the fixture with the provided stems and/or chain and assemble them by screwing them together. All the parts may be used alone or used in combination. 2 Feed the fixture wires through the stem assembly and screw the stem assembly to the socket assembly.