Installation Sheet

Installation Instructions for

Dex Wall

1.0

DEX_WALL

4154301, 4454302, 4554302, 4654303

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing NEC compliant junction

boxes.

This product is safety listed for damp locations.

This instruction shows a typical installation.

WALL

Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.

7400 Linder Ave., Skokie, IL 60077

T 847.410.4400 | F 847.410.4500

www.generationlighting.com

CAUTION RISK OF FIRE-

This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and

operation of the product and the hazards involved.

Use minimum 90°c supply conductors.

SAVE THESE INSTRUCTIONS!

PAGE 1
DEX_WALL Installation Instructions for Dex Wall 4154301, 4454302, 4554302, 4654303 1.0 WALL GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. This instruction shows a typical installation. CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
PAGE 2
Install the Fixture 1A 7 FIXTURE CAP NUT DIFFUSER BRACKET LAMP 6 BRACKET STUD JUNCTION BOX 3 2 5 4 MOUNTING PLATE 6 7 1 Secure the mounting plate to the junction box or wall. 2 Connect the fixture to a suitable ground in accordance with local electrical codes. 3 Connect the white fixture wire to the neutral power line wire with a wire nut. 4 Connect the black fixture wire to the hot power line wire with a wire nut.