Installation Sheet

1A
Install the Fixture
2
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the fixture base onto the mounting studs, and secure it in place by screwing the cap
nuts onto the studs.
Install the candle tube by sliding it over the socket.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
1
2
3
4
5
6
7
JUNCTION BOX
MOUNTING PLATE
MOUNTING STUD
SOCKET
CANDLE TUBE
LAMP
7
4
3
CAP NUT
5
6