Specification Sheet

Job Name: Job Type:
Comments: Quantity:
Product Number: 11028QC

11028QC - New Construction - IC Airtight 6" Housing with
"Quick Connects"

 New Construction Airtight IC Housing with Quick Connects 
 IC housing is approved for use in direct contact with insulation 
 Housing adjusts vertically for various ceiling thicknesses 

Break-away bar hangers easily extend and will not fall out of plaster
flange, providing sturdy installation

 Snap-In Socket locates lamp in optimum location 
 No clips required. Secure bar hanger to T-Bars with wires or screws 
 Tab to locate on bottom of joist 
 Meets airtight requirements for 2.0 CFM or less air leakage 

Junction box with integral romex connector, quick push and lock
connector and through circuit wiring with 4 in, 4 out #12 wire, saves
installation time.


The hinged junction box door allows full access for wiring while
remaining attached to the recess housing

 Tighten screw to lock bar hangers in place 
 Integral captive nails included and positioned for fast, easy installation 
 One piece sealed trims. No light leaks 

UPC #:
785652110290

Product Type:
Recessed
Light
Features:
Title 24 
Specification Images
Dimensions:
Diameter: 6 3/8''
Length: 13 1/2"
Width: 10 3/4''
Height: 7 7/8''
Weight: 2.2 lbs.
Switch Type: N/A
Mounting Proc.: Other
Bulbs:
1 - Medium Par30S 50w max 120v - Not included
1 - Medium Par30 75w max 120v - Not included
1 - Medium Par38 90w max 120v - Not included
1 - Medium BR-30 65w max 120v - Not included
1 - Medium BR-40 90w max 120v - Not included
1 - Medium Par30L 75w max 120v - Not included
1 - Medium BR-30 65w max 120v - Not included
1 - Medium Par30S 50w max 120v - Not included
1 - Medium Par30L 75w max 120v - Not included
1 - Medium Par38 90w max 120v - Not included
Sea Gull Lighting reserves the right to revise the design of components of any product due to parts availability or change in safety listing standards without assuming any obligation or liability to modify any products previously manufactured
and without notice. This literature depicts a product design that is the sole and exclusive property of Sea Gull Lighting. In compliance with U.S copyright and patent requirements, notification is hereby presented in this form that this literature,
or the product it depicts, is not to be copied, altered or used in any manner without the express written consent of, or contrary to the best interests of Sea Gull Lighting Products, LLC – A Generation Brands Company.
Vist our web site at www.seagulllighting.com
Sea Gull Lighting - 11028QC - page 1 of 4