Daim Ntawv Qhia Tus Neeg Siv
Screen Indicators
ROOM THERMOSTAT PLACEMENT
Room Thermostat needs to be placed in the room which is used most
frequently. For instance; living room or lounge. Placing the Room
Thermostat in a spot that have air circulation like entrance of a room or side
of window should be avoided. Also anywhere close to heating/cooling units
such as radiator, stove and spots which get direct sun lights would not be
suitable. Room Thermostat needs to be located above the floor 150 cm
height. Few trials may be made to find the most convenient spot.
BATTERY PLACEMENT
Before starting, power off the device connected to the Room Thermostat
and make sure that the energy is cut off.
As shown in the picture above, press the screwdriver forward from the space
shown, bend the tabs and separate the front cover. Insert 2 new AAA alkaline
batteries in the battery housing with the correct battery direction. Replace
both batteries at the same time. Then align the front part of your Room
Thermostat to the back and squeeze it towards the back.
GENERAL SPECIFICATIONS
HT300S is a wired room thermostat. The user can adjust the room
temperature with the required temperature and get more comfortable and
economic heating/cooling.
Daily and Weekly Programming
Different Mode Options (Comfort, Economy)
Heating Calibration ON/OFF Control Wired Connection
Heating/Cooling Option TPI Algorithm
Precise Temperature Measurement
HT300S AND EQUIPMENTS
TECHNICAL DATA
ROOM THERMOSTAT
Buttons Functions
ENGLISH
HT300S USER MANUAL
generallife.com.tr
DIGITAL ROOM THERMOSTAT
Hour Indicator
Room Temperature
Economy Mode
Comfort Mode
Holiday Mode
Weekly Program Mode
Day Indicator
Screen Lock
Battery Indicator
Set Temperature
Heating Indicator
- If the Heating Indicator is blinking, the heating unit is working.
- If the Heating Indicator is steady, the heating unit is not working.
Cooling Indicator
- If the Cooling Indicator is blinking, the cooling unit is working.
- If the Cooling Indicator is steady, the cooling unit is not working.
1
2
3
4
5
6
7
8
9
10
11
12
1
2 3
85mm / 125mm / 20mm
3V DC (2 x AAA alkaline battery)
2A/30VDC (Resistive load)
0.5A/125VAC (Resistive load)
o
0.1 C
o o
(5 C) – (30 C)
1 Year (2 x AAA)
o o
(-10 C) – (+50 C)
o o
(-20 C) – (+60 C)
Dimensions
Operating Current
Relay NO Switching Current
Temperature Measurement Accuracy
Operating Temperature Range
Battery Life
Operating Temperature
Storage Temperature
Alkaline Battery
4
Weekly Program Button
Temperature Adjustment Button (To Increase)
Heating & Cooling Option
Temperature Adjustment Button (To Decrease)
Mode Button
On/Off Button – Unlock Button
1
2
3
4
5
6
AAA
AAA
Dowels and Screws
min. 20 cm
HT300S
Room Thermostat
1
2
3
4
5
6
9
11
12
7
10
8
1
2
3
4
5
6
MODE SETTING
Your Room Thermostat has 4 different modes. 3 of them (Comfort and
Economy Mode) are preset modes. Other modes are manual mode and
weekly program mode.
In preset modes, temperature values are based on user's choices which
have been set in the beginning. Manual mode allows the Room Thermostat
to operate within the temperature which is required and set directly by user.
Weekly Program mode continues to work according to the weekly schedule
determined by the user.
In order to change the temperature values of preset modes:
Press and hold the “Mode” button for 3 seconds while your Room
Thermostat is on.
Comfort Mode temperature value will appear. You may adjust the
temperature value of Comfort Mode by pressing the “Up” and “Down”
buttons.
When setting is done, you may adjust the temperature value of Economy
Mode with the “Up” and “Down” buttons by pressing the “Mode” button
again.
You may exit the setting screen by pressing the “Mode” button 3 seconds.
In order to change the manual mode temperature, press the “Up” or
“Down” button while in the main screen. The Room Thermostat will switch
to Manual Mode once pressed the “Up” or “Down” button.
You may press the “Mode” button to switch to the other modes.
WEEKLY PROGRAM
You may set the operating schedule of your Room Thermostat with weekly
program mode. 7 different temperature values can be set for each day in
weekly programming. These values can be set in temperature adjustment
screens '' P0-P6''.
In order to set the weekly schedule, press and hold the “Weekly Program“
button for 3 seconds while your Room Thermostat is on. The “Hour,
Minute and Day” setting will appear. Press the “Heating & Cooling Option”
button until the “Weekly Program” menu (P0) appears.
Days of the week will be blinking on the screen. You can initiate the weekly
program setting if you wish to set the same schedule for every day of the
week.
Press the “Up“ button once if you wish to set the same schedule for the
weekdays. First five days of week will be blinking on the screen.
Press the “Up“ button once more if you wish to set the same schedule only
for the weekend. Last two days of the week will be blinking on the screen.
Press the “Up“ button one more time if you wish to set the same schedule
for every day of the week. 1st day of the week will be blinking on the
screen. You can switch between the days by pressing the “Up“ button.
Press the “Down“ button in order to switch to the previous day.
Press the “Weekly Program“ button once to set a schedule.
“P0” will be blinking on the screen. Set the temperature value of “P0” by
pressing the “Weekly Program“ button once more. The hour setting of “P0”
cannot be changed since it's factory setting.
Press the “Weekly Program” button again. Day indicator will be blinking. If
you will not change the day, press the “Weekly Program” button again and
switch to the “P1” setting by pressing the “Up” button.
First, hour setting will appear on the screen. Once you complete the hour
setting, adjust the minute setting by pressing the “Weekly Program”
button. After the minute setting, press the “Weekly Program” button to set
the temperature value.
Follow the same steps for other schedule settings.
Once all changes made, press and hold the “Weekly Program” button for 3
seconds to save.
Note: In order to check the weekly schedule which has been set without
making any changes, press the “Weekly Program” button once while your
Room Thermostat is on. Press the “Up” and “Down” buttons to see the days,
press the “Mode” button to see the settings between “P0-P6”.
MODES
PRESET MODES
WEEKLY
PROGRAM
MODE
MANUAL MODE
Comfort
Mode
Economy
Mode
Low Battery Warning: When the “ ” icon appears on the screen, it means
“low battery warning”. It is recommended to replace the batteries when this
warning appears.
Warning: When the product is not used for a long period (more than 15 days),
remove the batteries. Otherwise, malfunctions that may occur would be out of
warranty.
Please throw your dead batteries into the waste bin for batteries.
ROOM THERMOSTAT WIRING DIAGRAM
Warning!
Operations within the heating / cooling unit or the electrical installation
must be carried out by professionally qualified persons.
ROOM THERMOSTAT TEMPERATURE CALIBRATION
Temperature sensors which are used in Room Thermostats are highly
sensitive. You may need to calibrate your Room Thermostat if you would like
to get the same temperature values with other thermometers in your living
space.
While your device is turned off, press and hold the “On/Off“ button for 3
seconds.
Press the "On/Off" button until the “ ” menu appears. In order to see
the desired temperature, set the temperature difference by pressing the
“Temperature Adjustment Buttons”. This value can be arranged between
“-8° C" and “+8° C".
In order to save the settings and exit, press the "On/Off" button until the
device turns off.
Note: Recommended temperature calibration is “0.0°C”.
FACTORY SETTINGS RESET
You can reset your Room Thermostat to its default factory settings. This
operation resets the mode temperature values, calibration setting and
heating/cooling modes to factory setting. In order to reset your Room
Thermostat to factory setting:
While your device is turned off, press and hold the “On/Off” button for 3
seconds.
Press the “On/Off” button until the “ ” menu appears.
While in the “ ” menu, select the “ ” option by using the “Up” or
“Down” buttons and press the “On/Off” button.
Your device will be turned off and reset to factory settings.
KEY LOCK
In the Room Thermostat there is a key lock function to avoid any unintended
contact.
In order to unlock the Room Thermostat's key lock the “On/Off” button
should be pressed for 3 seconds. If buttons on Room Thermostat are not
touched for 10 seconds, key lock will be reactivated.
DAY AND HOUR SETTINGS
While your Room Thermostat is on, keep pressing the “Weekly Program”
button for 3 seconds.
At the first screen that appears, hour part will be blinking. You may set the
time with the “Up” and “Down” buttons.
After setting the time, the “Heating & Cooling Option” button needs to be
pressed once. For minute setting, minute part will be blinking. You may set
the minute with the “Up” and “Down” buttons.
After setting the minute, the “Heating & Cooling Option” button needs to
be pressed once to set the day of the week.
Monday has set as the first day of the week and indicated with number “1".
Numbers indicate the following days respectively 2-Tuesday,
3-Wednesday, 4-Thursday, 5-Friday, 6-Saturday and 7-Sunday
When setting is done, you may exit by pressing the “Weekly Program”
button for 3 seconds.
COMNO
HEATING/COOLING UNIT