Use and Care Manual

GEM110 Mixer operation instruction edition a
maintenance. Clean it with a piece of soft and a bit wet cloth. Don’t
clean it with liquid or spraying detergent
***
Warning: Do not use medium or high speed for kneading dough.
7、
Maintenances
a. After using, you should clean the bow
l and agitator ect, make sure to
keep the machine clean.
b. The transm
ission gear box is packed with special grease, it could be used
for six mouths in normal condition. If it need to add or replace the
grease, please open the top cover ,then pour the grease from aperture or
replace the grease directly.
8、Problems and solutions
Problems Causes Solutions
The mixing shaft doesn’t
rotate after starting the
machine
Electric connectors are
loose
Check the electric
circuit, tighten
those loose
connects
Oil leakage The oil seals are worn
out
Replace those oil
seals
Too low voltage Check the power
supply
Over-load Lessen the quantity
of the mixture
The temperature of the motor
becomes higher and the
rotating speed becomes
lower
The speed of mixing is
too high or the mixing
is not suitable
Select a suitable
speed and mixing
The mixing knocks with the
bowl
The mixing or the
bowl is deformed
repair or replace the
mixing or bowl
The noise of the gearbox is
serious, its temperature is too
high
Lubrication is
insufficient
Add or replace the
grease
9. exploded assembly draw
ing
Page 4 of 4