Phau Ntawv Qhia

Fig 3:
WARNING: Mounts must be anchored to building structure, which
will support a minimum of at least 100 pounds. Never mount to
surfaces such as dry wall or false ceiling grids, etc.
Remote Control and Features: The remote control is a six-button
remote control with a light button as shown in the figure 3:
Function of the keys:
1. The I/O key is the on-off key. Press once to power on and again to
power off.
2. AUTO is the automatic mode key. Press this button to indicate that
the fan and sensor will automatically operate according to the
current air quality. For example, if the air quality is not good, the fan
will start to work at high speed and high air volume, when the air
quality get medium, it will change to medium air volume and when
the air quality is good, the fan stops working.
3. FAN is the manual air volume adjustment key of the FAN. The air
volume is divided into three levels: high, medium and low. After
pressing this button, use the + (plus) or - (minus) button to manually
adjust the air volume.
4. TIME is the timing function key. After pressing this key, use the +
(plus) or - (minus) button to adjust the working time (1-12 Hours)
5. + and – keys are parameter adjustment keys.
The above remote control function requires the host LCD screen to
display the corresponding changes synchronously during operation.
Including timing and time indices
display, fan speed change and air
quality change display.
Fig. 3