Phau Ntawv Qhia

Figure 1; Eye Bolts with Hex Nuts
Figure 2; Eye bolt threaded hole
Assembly
CAUTION:
1. Remove all packing from inside of the unit by
removing the outer filter and inner filters.
2. The air filtration unit can be hung from the ceiling.
Remove four screws from the cabinet top (Fig. 1).
3. Hang the unit using four eyebolts (Fig. 1), and four
hex nuts provided.
4. The lock nut needs to be threaded almost all the
way up the eyebolt. Screw the eye bolt into the hole
(Fig. 2) and tighten lock nut against the cabinet top.
You will need to hold the eye bolt so it does not spin
while tightening the lock nut.
5. Repeat steps for remaining three eyebolts.
Note: Make sure chain and ceiling hooks are
properly rated for hanging this unit. Hang unit with a
seven-foot clearance from the floor to bottom of
unit.