Air Filtration 10-1000 Revised: 12-2020
IMPORTANT SAFETY INSTRUCTIONS: WARNING – To reduce risk of injury: 1. FOR YOUR OWN SAFETY, READ INSTRUCTION MANUAL BEFORE OPERATING THE TOOL. Learn the tool’s application and limitations as well as the specific hazards peculiar to it. 2. KEEP GUARDS IN PLACE and in working order. 3. ALWAYS WEAR EYE PROTECTION. 4. GROUND ALL TOOLS. If tool is equipped with three prong plug, it should be plugged into a three-hole electrical receptacle.
17. USE RECOMMENDED ACCESSORIES. The use of accessories and attachments not recommended by manufacturer may cause hazards or risk of injury to persons. 18. AVOID ACCIDENTAL STARTING. Make sure switch is in “OFF” position before plugging in power cord. 19. NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the fan blade is accidentally contacted. 20. CHECK DAMAGED PARTS.
TABLE OF CONTENTS: IMPORTANT SAFETY INSTRUCTIONS.........................................................................................................2 Table of Contents .................................................................................................................................... 4 Electrical Requirements .......................................................................................................................... 5 Specifications .......................................
Electrical Requirements • In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances. • Do not modify the plug provided.
Specifications: #10-1000 Stock Number ............................................................................................................................ 10-1000 M1 Outer Filter ................................................................................................................................... 5 Microns Inner Filter .....................................................................................................................................
Contents of shipping carton: 1 Air Filtration Unit 1 Remote Control 2 AAA Batteries 4 Eye Bolts and Nuts 1 Manual and Warranty Card Tools required for assembly No.
Assembly CAUTION: Figure 1; Eye Bolts with Hex Nuts 1. Remove all packing from inside of the unit by removing the outer filter and inner filters. 2. The air filtration unit can be hung from the ceiling. Remove four screws from the cabinet top (Fig. 1). 3. Hang the unit using four eyebolts (Fig. 1), and four hex nuts provided. 4. The lock nut needs to be threaded almost all the way up the eyebolt. Screw the eye bolt into the hole (Fig. 2) and tighten lock nut against the cabinet top.
3: WARNING: Mounts must be anchored to building structure,Fig which will support a minimum of at least 100 pounds. Never mount to surfaces such as dry wall or false ceiling grids, etc. Remote Control and Features: The remote control is a six-button remote control with a light button as shown in the figure 3: Function of the keys: 1. The I/O key is the on-off key. Press once to power on and again to power off. 2. AUTO is the automatic mode key.
Changing the Filters : Fig 4: To reduce the risk of injury, disconnect the air cleaner from the power source (unplug) before servicing or changing filters. Failure to comply may cause serious injury! There are two filters that need to be changed. The outer filter can easily be removed by disengaging the two clips (fig 4:). Now you can simply pull the filter out, or use a screwdriver to pop the filter out. Fig 5: The inner filter (Fig 5.) can now be pulled out of the unit.
Replacement Parts: To order parts or reach our service department, call 888-664-0449, Monday through Friday (see our website for business hours, (www.GENERAL.ca). Having the Model Number and Serial Number of your machine available when you call will allow us to serve you quickly and accurately.
#10-1000 PART NUMBERS: PARTS REFERENCE DESCRIPTION SPECIFICATION QTY. 1 101000-1 Box 1.000 2 101000-2 Grip 2.000 3 101000-3 Eyebolt M6×20 4.000 4 101000-4 Hex nut GB/T6170/M6 4.000 5 101000-5 Cross pan head screw GB/T818/M6×10 4.000 6 101000-6 Hexagon bolt GB/T5781/M6×8 8.000 7 101000-7 Spring washer GB/T93/6 14.000 8 101000-8 Board 9 101000-9 Hexagon socket head screw GB/T70.2/M6×20 6.000 10 101000-10 Flat washer GB/T97.1/6 6.
25 101000-25 Wiring SM2.54 26 101000-26 Cable clamp 3.000 27 101000-27 Remote control 1.000 28 101000-28 Clip 2.000 29 101000-29 Medium efficiency filter 30 101000-30 Primary filter 31 101000-31 Draught fan 120V/60HZ/150W 1.000 32 101000-32 Rebite GB/T12618/3×8 4.000 33 101000-33 Closed end terminal CE-1/Φ2.4 2.000 34 101000-34 Buckle 35 101000-35 Dust sensor PM2.5 1.000 36 101000-36 Hex nut GB/T6170/M5 4.
10-1000 M1 Wiring Diagram:
Warranty Statement and Policy Commercial General™ (Green Line) & Excalibur™ (Black Line) branded products: 3 -YEAR LIMITED WARRANTY All products are warranted for a period of 3 years (36 months) from the date of purchase. General™ agrees to repair or replace any part or component which upon examination, proves to be defective in either workmanship or material or parts and labor to the original purchaser during this 3year warranty period, subject to the “conditions and exceptions” as listed below.
