Cold-Shot Brochure

Web Site: www.drainbrain.com

1101 Thompson Avenue • McKees Rocks, PA 15136 USA

800-245-6200 or 412-771-6300 • Fax: 412-771-2771

FREEZE OPERATIONS

FREEZE HEAD FREEZING PER FREEZE HEAD

SIZE MATERIAL TIME PER 20 LBS (10 kg) CYLINDER

1/8" Steel 1 min. 165

(10 / 12mm) Copper 1 min. 160

1/4" Steel 1 min. 130

(15 mm) Copper 2 min. 75

3/8" Steel 2 min. 65

(18 mm) Copper 3 min. 50

1/2" Steel 3 min. 45

(22 mm) Copper 5 min. 30

3/4" Steel 5 min. 29

(28 mm) Copper 7 min. 22

1" Steel 7 min. 20

(35 mm) Copper 10 min. 15

1-1/4" Steel 11 min. 15

(42 mm) Copper 14 min. 11

1-1/2" Steel 16 min. 10

(54 mm) Copper 24 min. 7

2" Steel 29 min. 5

(60 mm) Copper 40 min. 2

The Cold-Shot is easy to use. Just place the

freeze head around the pipe, attach the hose, and open the cylinder

valve. Liquid carbon dioxide will ﬂow into the freeze head and form

dry ice with a temperature of minus 110F° (-79C°). That’s cold

enough to form an ice pack that can withstand 7,000 psi,

yet won’t damage pipes.

Kit includes 10 sets of

freeze heads for 1/8" to 2" lines (10mm to 60mm),

two high pressure spiral hoses with injectors,

T-distributor, locking nut, hex head screwdriver,

rubber gloves, goggles and carrying case.

The freezing times and CO

2 requirements in the table below are general

guidelines based on a water temperature 68 F° (20C°). These ﬁgures will vary

for other temperatures. Longer freezing times are required for plastic pipe.

Cat. No. Boxed Wt.

CST-2

Cold-Shot Pipe Freeze Kit 12 lbs.