Jumbo Display In/Out Temperature-Humidity Meter with Clock USER’S MANUAL DTH04 Please read this manual carefully and thoroughly before using this product.
KEY FEATURES • Triple readout shows time, inside or outside temperature, and inside or outside relative humidity (RH) • Stores and recalls Min and Max temp and RH readings • Warm, Comfortable and Cool indications • °C/°F switch on back • 12/24 hour alarm clock with 10 minute snooze option • Includes flip-out stand, 9.8 ft.
SETUP INSTRUCTIONS Install Batteries: 1. Slide off cover of battery compartment on back of unit. 2. Install (2) included “AAA” batteries in compartment in correct position. 3. Replace battery compartment cover. OPERATING INSTRUCTIONS ON/OFF: 1. Press ON/OFF button once to power on the meter and press again to power it off. “WARM”, “COMFORT” or “COOL” appears at specific combination of temperature and humidity. °C/°F: 1. Press °C/°F button to select desired temperature unit. Max/Min: 1.
2. Press HR and MIN buttons until the display shows the current time. 3. Press 12/24 button to select time format. 4. Press TIME SET button to save setting and return to real time mode. If button is not pressed within 5 seconds, unit will not save new setting and will return to real time mode using previous setting. In/Out: 1. Press IN/OUT button once to display outdoor measurements. OUT will appear on the display. 2. Press button again to display indoor measurements. IN will will appear on the display.
3. When the set alarm time is reached, will flash and alarm will sound for 1 minute. Press any key to silence the alarm. 4. 10 minutes after the alarm sounds, SNZ will flash and the alarm will sound 5 times. Press any key to silence the alarm. 5. To clear the snooze function, press and hold the AL/SNZ button for 3 seconds to enter alarm set mode. Then press the AL/SNZ button again. The and SNZ indications will disappear.
GENERAL TOOLS & INSTRUMENTS 80 White Street New York, NY 10013-3567 PHONE (212) 431-6100 FAX (212) 431-6499 TOLL FREE (800) 697-8665 e-mail: sales@generaltools.com www.generaltools.com DTH04 User’s Manual Specifications subject to change without notice ©2012 GENERAL TOOLS & INSTRUMENTS NOTICE - WE ARE NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS.
