Installation Guide

Countersinks, Drill Bits, Gages
WOOD WORKING TOOLS
19
General Tools & Instruments
Pilot Bits, countersink and counterbore precision
screw holes in a single operation. Self-Centering
Hinge Bits drill highly accurate pilot holes in cabinet
and door hinges.
Stair gages assure fast and uniform layout in
repetitive work including angle cuts on rafters
and stair stringers.
• The rose pattern cutting flutes assure
chatter free countersinking on steel, brass,
aluminum, plastic, wood & other materials
• Made of high-speed steel with five flutes
• 82° point angle
• Stepped shank for use with 1/4" and 3/8"
chucks
UPC NO.
23047 8 195-1/2
23053 9 195-5/8
23050 8 195-3/4 "
UPC NO. DRILL SIZE DRILL DEPTH SCREW SIZE
22154 4 291 5/64" 1/8" 3 & 4 screw size
22149 0 292 7/64" 7/32" 5 & 6 screw size
22150 6 293 9/64" 5/16" 8 & 10 screw size
195-1/2
195-5/8
CB
A
195-3/4
293
292
291
JIFFY CENTERING PUNCH
• For quickly starting screw holes when attaching
countersunk hardware such as hinges, hasps,
hangers and drawer pulls
• Countersunk end ensures starting hole is
centered in hardware screw hole
• Hardened steel pin
• Length:
2-1/2" (68mm)
• Body diameter: 3/8" (10mm)
UPC NO.
24018 7 806
STAIR GAGE SET
• Brass plated steel stair gage assures fast and
uniform layout in repetitive work including angle
cuts on rafters and stair stringers
• Attaches easily to all metal rafter squares
• Set of 2 pieces
UPC NO.
24009 5 803
806
803
SELF-CENTERING HINGE BITS
• Highly accurate bits are used for drilling pilot
holes in cabinet and door hinges, door butts
and all large and small hardware
• Spring loaded outer guide keeps the high speed
drill centered for perfect pilot holes
• Adjustable drill depth
NO. A B C
195-1/2 1/2" 3/8" 1/4"
195-5/8 5/8" 3/8" 1/4"
195-3/4 3/4" 3/8" 1/4"
ADJUSTABLE PILOT BITS
Drill, countersink and counter-bore precision
screw holes in a single operation with General’s
Adjustable Pilot Bit Set. Featuring four high-speed
bits with adjustable lengths, this set can be a
great time saver for fine carpentry and
woodworking. The 1/4” hex shank allows the set
to be used in both electric drills and power
screwdrivers.
• Drill, countersink and counterbore precision
screw holes in a single operation when doing
fine carpentry and woodworking
• Hardened high-speed pilot bits give long life
• Black oxide finish deters rust
• 1/4" hex shanks prevents slippage in
electric drills and can be used in power
screwdrivers
• Adjustable drill and high performance angle
on countersink
UPC NO. SCREW SIZES
23041 6 34ST Set of 4 Pilot Bits
(Sizes 5 – 14)
34ST