Specification

ADAMS ENGINEERED PRODUCTS
413 E. Dixie High
way
Elizabethtown, KY 42701
[phone]
Fax: [phone]
While the information and recommendations set forth herein are believed to be accurate, we make no warranty
with respect hereto and disclaim all liability from reliance thereon.
- 1 -
MATERIAL SAFETY DATA SHEET
SECTION 1: CHEMICAL PRODUCT
C A S T & S I N T E R E D
P E R M A N E N T M A G N E T S
GRADE NOMINAL PERCENT COMPOSITION
AL NI CO CU TI FE
ALNICO 1 12 21 5 3 -- BAL.
ALNICO 2 10 19 13 3 -- BAL.
ALNICO 3 12 25 -- 3 -- BAL.
ALNICO 4 12 27 5 -- -- BAL.
ALNICO 5, 5DG, 5COL. 8 14 24 3 -- BAL.
ALNICO 6 8 16 24 3 1 BAL.
ALNICO 8, 9 7 15 35 4 5 BAL.
ALNICO 8HC 8 14 38 5 9 BAL.
The product as supplied presents no health hazard unless it is abrasive ground, cut machined or melted.
These procedures may produce hazardous amounts of metallic dusts or fumes. Such operations should be
evaluated to determine if a health hazard exists.
SECTION 2: COMPOSITION, INFORMATION OR INGREDIENTS
CAS NO. ELEMENT SYMBOL
ACGIH TLV*
(mg/m3)
AIR CONTAMINATION
Aluminum Al 10.0 Metal dust, gas/oxide
7429-90-5
Aluminum Al 5.0 Welding fumes
7440-02-0 Nickel Ni 0.05** Elem., insoluble & soluble compounds
7440-48-4 Cobalt Co 0.02 Intended change for 93-94
Copper Cu 0.2 As fume
7440-50-8
Copper Cu 1.0 As dusts/mists
1309-37-1 Iron Fe *** ***
13463-67-1 Titanium Ti (as Ti02) 10.0 Total Dust
* American Conference of Governmental Industrial Hygienists, 1993-1994.
Threshold Limit Values (TLV) based on an 8-hour day, 40-hour week.
** Listed human carcinogen by National Toxicology Program, 3
rd
ann. rep.
*** Not listed or no information available.