Specification Sheet

DOWEL PINS
• General’s dowel centers are the
quickest and most accurate method to
locate, transfer and match dowel holes.
• Made of nickel plated steel.
• Set includes 8 pcs., two of each size:
1/4", 5/16", 3/8", 1/2" diameter.
DOWEL AND TENON CENTERS
• For accurate transfer of dowel holes
and tenons.
• Scribe point transfers mark for accurate
drilling position.
• Internal centering pin locates center of
dowel for accurate drilling.
• Made of brass plated steel.
• Set includes eight pieces which provides
user with four tenon sizes: 3/16", 1/4",
5/16", 3/8" I.D. and four dowel sizes:
1/4", 5/16", 3/8", 1/2" O.D.
UPC CODE NO.
25099 5 888 Dowel centers
25111 4 889 Dowel and tenon pins
DOWELING JIG
• A precision jig that assures accurate line
up of dowel holes in furniture and
carpentry.
• Revolving turret has six twist drill sizes.
• Just lift and turn turret to lock in guide
hole.
• Guide bars are graduated for fast
positioning of hole center points.
• Clamp screw locks tool onto work from
0" to 4" in width.
• Rust resistant plated turret and parts and
painted die-cast body.
• Instructions included.
UPC CODE NO. CAPACITY
24120 7 840 3/16", 1/4", 5/16"
3/8", 7/16", 1/2"
DRILL STOP SET
• For use on twist or brad point drills to
prevent excessive drill penetration.
• Positive depth control assures exact hole
depths for multiple drilling jobs.
• Black oxide finish on cold rolled steel.
• Includes hex wrench.
UPC CODE NO. SIZE INCLUDED
23096 6 S838 3/16" dia.,1/4" dia.,
5/16" dia., 3/8" dia.,
7/16" dia., 1/2" dia.
DIAL SETTING DOWELING JIG
• General’s exclusive Dial Setting Doweling
Jig is a significant advance over
currently available edge to surface
doweling jigs.
• Complements our best selling Doweling
Jig No. 840.
• Its unique design reduces the need for
prior measurements and markings.
• For right angle doweling, no reversing of
workpieces is necessary; simply clamp
work into place and drill dowel holes. No
further setup is necessary; just slide jig
along workpieces to produce any number
of matching dowel holes.
• Tee joints can also be made with fewer
measurements, as guide slots align work-
pieces for drilling.
• Color-coded dial sets correct dowel hole
size for wood thickness.
• Dial simultaneously positions both
bushings for accurate drilling of right
angle joints.
• Hardened steel guide bushings with steel
positioning mechanism in high-impact
engineering plastic body.
• Makes dowel holes of 1/4", 5/16" and
3/8" in wood stock from 13/32" to
1-1/8" thick.
• For use with twist drill and brad
point drills.
UPC CODE NO. CAPACITY
24123 8 841 1/4 " , 5/16 " , 3/8 "
13
Woodworking Tools
DRILL
ACCESS-
ORIES
General’s doweling jigs are precision jigs that assure the accurate line-up
of dowel holes in furniture and carpentry. Simply clamp the jig onto your
workpiece to quickly and accurately drill holes for dowel pins requiring
exact alignment in the edge, end or surface of your work. Graduations
permit direct reading and accurate setting of jig to center line of work.
840
889
S838
841