User's Manual

6 160228 V1.0
Trouble Shootings
Problems Causes Solutions
Can’t charge.
Loose connection of
the charging wire
Please make sure the connection
is good before use.
The Charging interface or
wire is bad
Replace before use
Dead battery Ask a technician to replace the
battery.
The product can’t power on.
The circuit is in protection
status.
Low energy of inside
battery
Use USB charging wire for
charging to release.
Take off the battery, charge then
install again to turn on
Dead battery
Use USB cable to charge
The circuit is in protection
status.
Replace the battery
Blue light off or 20s after
turning on the blue light is not
on
Low battery. Use USB cable to charge
The image has spots The camers head has spots. Check and clean.
The image is still or disappears There is interference Restart the device and connect
C a u t i o n s
● Don’t drop the product or use by force.
● Don’t disassemble the product to avoid failure.
● Keep the product clean and dry.
●Don’t place the product with corrosive gas or objects.