User's Manual

1 160228 V1.0
ToolSmart Illuminated Inspection Camera
Model：
：：
：TS07
Overview
TS07 product has CMOS image sensor, it combines the light function and wifi camera head with one
product. Lighting for the Scope’s line-of-sight camera is provided by a powerful LED, also can send the
target video and image to the platform device for remote recording and review.
The unit uses WIFI technology and supports iPad/ iPhone/ Android .etc. It is easy for realtime image
display, also can take a photo and video using a platform.
LED flashlight can be used separately with several modes or to illuminate camera’s field of view. It has
built-in polymer lithium battery, also could use 5V DC adapter or USB port for charging with LED indicator. It
has the advantages of small size、stable performance、easy operation and portability. It is widely used in
applications such as daily carry, camping, on foot ,hunting, fishing, industry, the building, the aviation, the
vehicles maintenance and so on.
Safety Instructions
Failure to follow the instructions listed below may result in electric shock or personal injury.
●Read and understand all instructions prior to any operation.
●Do not remove any labels from the tool.
●Don’t stare at the flashlight or exposure the light to another person, it will hurt people’s eyes and blasting flash
function can make eyes temporarily blind dizzy.
●Do not operate the tool with the presence of flammable/explosive gases.
●Keep bystanders、children and visitors away while operating the tool.
●Please put the device away from children while not use, otherwise will cause danager.
●Don’t operate the device under humidity, low temperature or high temperature for long time, otherwise will
damage the device and decrease the lifetime.
●The unit is not shock-resistant. Do not use it as a hammer or drop it.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation。
Battery precautions
● Take off the battery when clean the device.
● Take off the battery if not use for long time.
● Place the battery with right polarity.
●The unit can connect the USB port to charge. Please use the standard factory connecting wire.
●The charging and discharging time differs because the different power from the factory.