User's Manual

up to 15.9% or under building material, up to 19.9% ), there will always buzzer sound indication. The sound will
be disappeared if the reading is lower; Holding the mode switch key, to turn off the buzzer sound .
8、Each short press the , inform APP to save the current data; Hold the button for 3 seconds to turn off or turn
on Bluetooth function, once Bluetooth enabled, it will automatically broadcast for 30s continuously while the
Bluetooth indicator blinks. If the Bluetooth broadcast time period there are a Bluetooth wireless device
connected, the Bluetooth indicator is on; If no Bluetooth device is connected, it will enter into low consumption
broadcast mode. (Tip: When you hold the button to turn off the Bluetooth function, the Bluetooth broadcast will
not appear every time you turn on; only after you re-enable Bluetooth, Bluetooth broadcast will appear after each
turn on)
9、Keeping pressing the power button for 2s to turn off the product.
● Accuracy checking instructions
The product has external accuracy checking function; Remove the protection cap, power on the unit, place the 2
pins into the 2 holes at the back of the cover, just now the LCD shows a value within 18.3%±1%; If beyond this
range, the accuracy has problem, advise to be repaired.
● Bluetooth wireless transmission
This product can be via Bluetooth wireless technology, real-time measurement of the transmission data and
memory data to a Bluetooth wireless device, and receive a Bluetooth wireless device, real-time control command
of this product operation control, data logging, downloads, and remote monitoring and control functions.
Product power on default status of the Bluetooth function is turned on, the Bluetooth indicator will flash on the
screen, it means waiting for the Bluetooth wireless connection.
● Operation notes
●Please replace the battery when the unit cannot be powered on or low battery indicator is on.
●Wood moisture values are related to ambient temperature humidity and wood material density. The best way to
recognize the right wood moisture content is to measure continuously day after day to obtain the corresponding
values and compare to judge.
●Electromagnetic Compatibility Statement:
The product has been in accordance with EU EMC tested and approved, this does not guarantee that the product
is absolutely immune to electromagnetic interference, avoid using this product in strong electromagnetic
environment.
● During operation, if there is any unusual production reaction, please take off the battery and install again.