User's Manual

1
ToolSmart Infrared Thermometer
Model：
：：
：TS05
Overview
TS05 ToolSmart Infrared Thermometer is a non-contact temperature measuring instrument
using infrared technology and laser pointer. The instrument with Bluetooth 4.0 wireless transmission
function, can bidirectional operation through the APP display, and can perform remote measurement
and data transmission .You could use this product to measure the surface temperature, which is not
suitable for traditional measuring ( such as moving objects, charged objects, toxic objects or
hard-to-reach objects).
The instrument features a low consumption design. It has a LCD with black background, a 12:1
proportional laser ring for accurate aiming and capable of auto holding the readings. It has the
advantages of rapid measuring, easy operation and portability. It is widely used for applications such
as finding the hot spot of electric connection and bearing, measuring the hot and high-frequency
induction heated objects, monitoring food processing and storage, inspecting temperature for heating
& refrigeration system, inspecting temperature for techniques control of metallurgy industry,
inspecting temperature during laying asphalt and fire-control work, or any other temperature
measuring without compromising the temperature field. It is a good measuring tool for the metallurgy,
the electric power plant, the chemical industry, the rubber industry, the spinning and weaving, the
plastic, the papermaking and the food processing.
TS05 ToolSmart Infrared Thermometer is Class 3R laser product and in compliance with
EN60825-1.
Safety Instructions
Failure to follow the instructions listed below may cause personal injury.
●Read and understand all instructions prior to any operation.
●Do not remove any labels from the tool.
●Do not operate the tool with the presence of flammable/explosive gases.
●Do not operate the laser tool around children or allow children to operate the laser tool, failure to do
so will injure children’s eyes.
●Do not stare into the laser beam.
●Do not project the laser beam directly into eyes of others.
●Do not set up the tool at eye level or operate the tool on or near a reflective surface, as the laser
could be projected into people’s eyes.
●Do not observe the laser beam by using optical tools such as binoculars, magnifying glass.