ToolSmart Infrared Thermometer Model: TS05 Operation Manual 0
ToolSmart Infrared Thermometer Model： ：TS05 Overview TS05 ToolSmart Infrared Thermometer is a non-contact temperature measuring instrument using infrared technology and laser pointer. The instrument with Bluetooth 4.0 wireless transmission function, can bidirectional operation through the APP display, and can perform remote measurement and data transmission .
●To avoid burning danger; remember that the reflected objects make the measuring temperature lower than the real one. ● Warning DANGER Class 3R Laser Product Maximum Power Output< 3mW Wavelength: 630-660nm Do not stare into the beam! Avoid direct eye exposure! This tool emits a laser radiation! This device complies with part 15 of the FCC Rules.
A．Laser target ring hole B．Infrared sensor C．Trigger ——ON / Measuring key D．Battery compartment E．LCD screen with black background——Show reading data and information F． ——Laser on or off G． ——Short press to transfer the bluetooth data to APP and save, hold for 3s for Bluetooth function on or off.
A：Low battery B：Readings C：Measuring scan D：Laser ON E：℉ F： ℃ G：Data hold H：Bluetooth connection indicator Operation Steps ● Battery installation Open the battery compartment, insert one 9V battery (6F22/6LR61), and close the lid. ● Measuring temperature 1. Pull the trigger to start the instrument and measuring, use the unit point to object to be tested than press the trigger, then measuring the temperature. Be sure to hold the trigger more than 0.5 seconds to have an accurate data.
5.When the battery is low, will appear on the screen. 6.The distance and target area: the value of D:S must be considered ( as showed ), the ratio should no more than the value of D:S. The field of view must be full of objects. As the distance from the object increases, the spot size of measuring area becomes larger. 7.Field of view: Be sure the target area is larger than the unit’s spot size. The smaller the target gets the closer the measured distance.
please avoid using this product in strong electromagnetic environment. 1. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
with a camel’s hair brush. Carefully wipe the surface with a moist cotton swab 2、Keep clean; Avoid drop and wet; the housing could be cleaned with wet sponge. C a u t i o n s ● Don’t drop and use the tool by force. ● Don’t disassemble the tool, (avoid causing trouble). ● Keep the tool dry and clean. ● Don’t place the tool with corrosive gas or objects. ● Avoid dust and water, which may stain the lens. ● Don’t clean the lens by any solvent. ● Don’t immerse the tool into water to avoid damage.
0℃～40℃(32℉～104℉) Operating temperature Operating humidity RH 0～75% non-condensing Storage temperature -20℃～60℃(-4℉～140℉)，≤85%（w/o battery） Product dimension 135 mm×170 mm×36mm Product weight About 158 g （w/o battery） Warranty The product is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase on the basis of providing relevant card.
