User's Manual

11 V0.2 131015
●If the tool couldn’t work well after turning it on. Please stop use and have the unit checked by a
qualified technician.
●Store idle product out of reach of children and other untrained persons. The tool is dangerous in the
hands of untrained users.
●Maintain the inspection tool with care. If the tool is dropped, check for the breakage ,which may affect
the tool’s operation. If it is damaged, have the tools serviced before using. Many accidents are caused by
poorly maintained products.
●Use only accessories that are recommended by the manufacturer for your product. Accessories are
suitable for the tool, but may become hazardous when used on another product.
●Dry your hands before turning the tool ON or OFF.
●Protect against excessive heat. The product should be kept away from heat sources, such as radiators、
heat registers、stoves or other products (including amplifiers) that produce heat. Don’t use the tool near
moving machinery or areas where the temperature exceeds 45℃.
●Please cover the camera protection while not in use.
●Store the product in ventilated and dry places.
Maintenance Instructions
●Product service must be performed only by qualified personnel. Performed by untrained personnel could
result in injury.
●When servicing the product, only use identical replacement parts. Use of authorized parts or failure to
follow maintenance instructions may create a risk of electrical shock or injury.
●Don’t attempt to disassemble the product other than the needs specified on this manual.
●Provide proper cleaning: don’t use acetone to clean the product. Gently clean the LCD with a soft dry
cloth.
●Upon completion of any service or repair, please ask the service technician to check if the tool is in
proper condition.
●Stop using the unit if it starts smoking or emitting noxious fumes.
●Please ask qualified person under the following conditions:
a. If liquid has been spilled or objects have fallen into product.
b. If product doesn’t operate normally even if you have followed the operation instructions.
c. If the product has been dropped or damaged in any way.
d. When the product exhibits a distinct change in performance.