User's Manual

6 V0.2 131015
● Connect to a PC via USB port
KC-250 has a USB 2.0 port, and can be connected to a PC.
Minimum configuration of the PC:
• P4 1.4GHz or higher CPU
• 256 MB RAM of system memory or above (recommended)
• One available USB port (USB2.0)
• Graphics Card (Must support Direct X 9.0c)
• 1GB Free HD Space
• CD-ROM Drive (For software installation)
• Microsoft Windows XP/Vista/Win7/Win8
1. Insert the included disk, find the disk folder in “My Computer”, double click the file “ScopeView” to
install control software and the driver;
2. Follow the steps, and the installer will prompt to restart the computer to complete the installation;
3. Connect the unit with a PC via USB and connect the probe on the grip. Press for 2 seconds to turn
on the grip power. Then, press to turn on the unit, and windows will detect new devices itself. Choose
install driver, a message says new device installed and ready to use will be prompted when it is done.
4. Open the software “ScopeView”, select “Instant USB Camera” under device drop list, and then click
“Connect” button to the right. The real-time image can be viewed from both the computer and the inspection
LCD screen.
5. Please refer to the software manual included in driver disk for detailed information about software
installation and operations.
6. Users are allowed to perform operations on received images using the control software, such as taking
photos and recording video clips etc.
7. Press grip “+” key to increase the LED brightness (Fig.13).
8. Press grip “-” to decrease the LED brightness.
9、Press and hold for 3 seconds to power off the screen. Then press on the grip for 2 seconds to
turn off the grip power.
Note: Under USB Camera mode, do not disassemble the camera probe to avoid the current disturb the unit.
When remove the USB connection wire, the unit will turn to the LCD display mode automatically.
● Work with a computer USB Disk