Use and Care Guide

Fig.7
Fig.8
The default measuring units can be
changed by following the steps below.
The unit should be turned off before
commencing.
m/s
m/s
ft/m
1. Press and hold the SEL/AVG key,
then press the ON/OFF key once to
turn the unit on. When the LCD
oo
displays " ft/m,ms " and " C, F"
release the SEL/AVG key.(Fig.7)
2. To choose metric units press the
HOLD key. The LCD should display "
o
m/s, C". (See Fig.8)
F. HOW TO CHANGE THE DEFAULT
SETTING/IMPERIAL TO METRIC
Vice Versa(METRIC TO IMPERIAL)
9
To choose the imperial units press the
SEL/AVG key. The LCD should display
o
"ft/m, F" (See Fig.9).
ft/m
Fig.9