Instruction Manual

53
Camera Connections
Charging the Battery Directly
You can charge the battery directly using the optional power adaptor.
1
Swing the rubber cover on the bottom of the camera
down to expose the power terminal on the right side.
Insert the single-plug end of the power adaptor into the
terminal.
2
3
Plug the other end of the adaptor into a 110VAC outlet.
4
The LED on the camera’s keypad will flicker
w
hile the battery is charging. When charging is
complete, the LED will stop flickering and steadily
glow green.
Unplug the power adaptor from the power outlet
after charging.