User Manual

• The Upper pointer and temperature will flash, enter
the desired upper limit with the “ +, - ” buttons,
press “ALERT” to confirm and go to the lower limit
setting.
• The Lower pointer and temperature will flash,
enter the desired lower limit with “ +, - ” buttons,
press “ALERT” to confirm and exit.
• Each setting cycle will allow setting one channel
for the temperature alarm, the unit allows to enter
temperature alert for outdoor sensor channel
1, 2, 3.
• When temperature hits the limit of the preset, the
Upper + Lower pointers and the temperature of
the respective channel will flash, Press any keys to
stop the alarm.
LOW BATTERY INDICATION:
Low battery indication is available for the home unit
itself and all of the 3 remote channels. Replace the
batteries and follow the setup procedure as
mentioned in this instruction manual.
EMR813 MANUAL-FINAL-82407 8/24/07 3:57 PM