Manual

User Guide
10
User Guide
11
(P.6)
(Figure.11)
(Figure.12)
Operating Instructions
Power On/Off
STEP1: To turn the console on, press the power button for 3~5 seconds until you see the sign below
appear on your monitor.
(
SD card memory capacity Battery capacity)
STEP2: Press the power button for 3~5 seconds to turn
the console off.
Change from Wireless to Direct Mode
STEP1:Slide the handle into the USB socket as
demonstrated in the diagram below.
STEP2:The image may appear fuzzy momentarily
while switching from wireless to direct mode.
Control Handle Indicator Lights
Light Indication Status Description
Green In use Working under full battery
Dark Red Low battery Please recharge the battery when the dark red light
appears during usage
Orange Charging while in use
Charging while in use
Red Charging while power off Charging while power off
None Full battery (during power-off) The light dims when the battery is fully charged
Taking Photos
Press button during Preview mode to take the photo.
Or, continue pressing the button to show the photo that had just been taken.
Image Status: Returns to preview Mode automatically after photo is taken.
Video Recording
1. Press button to start video recording.
Image Status: sign will appear at the left bottom of the screen.
2. Press button again to stop recording.
Image Status: sign disappears.
(P.7)
(Figure.13)
(P.8)
(Figure.14)