User guide

• When inspecting a vehicle, shut off the engine. Metal and liquid under the hood may be hot. Do
not get oil or gas on the camera head.
• If condensation forms inside the camera lens, let it evaporate before using the probe again.
• Do not try to disassemble any part of the probe. Doing so creates an electrical hazard, could
damage the probe, and voids the limited warranty.
• Do not use any corrosive liquid—such as alcohol—to clean the probe body or camera head. Use
a cotton swab and a mild fluid detergent to clean the body and head.
COMPATIBLE PROBES
The table below lists and describes the probes compatible with the H16.
Model No. (SKU) Probe Description UPC Camera Head Diameter Probe Length Depth of Field
P16ART-1SM Soft Metal 01418 9 1m (3.28 ft.)
P16ART-2SM 01476 9 2m (6.6 ft.)
P16ART-3SM 01500 1 3m (9.8 ft.)
P16HPART VGA Resolution 01579 9 1m (3.28 ft.)
Articulating Probe
P16181SR-M 01408 0 1m (3.28 ft.)
P16182SR-M 01409 7 2m (6.6 ft.)
P16183SR-M 01410 3 3m (9.8 ft.)
P16181SM-M 01411 0 1m (3.28 ft.)
P16183SM-M 01412 7 3m (9.8 ft.)
P16185SM-M 01414 4 5m (16 ft.)
P161810SM-M 01414 1 10m (32 ft.)
P161830SM-M 01415 8 30m (98 ft.)
P1839-M 01424 0 1m (3.28 ft.)
(
P16182-39 01556 8 2m (6.6 ft.)
P16183-39 01557 5 3m (9.8 ft.)
P1618FS-49 01481 3 1m (3.28 ft.)
P16182-49 01554 4 2m (6.6 ft.)
P16183-49 01553 7 3m (9.8 ft.)
P16181HP VGA Resolution Probe 01576 6 1m (3.28 ft.) 0.4 to 12 in. (10 to 300mm)
P1618SV-1SM Side View Soft 01407 3 1m (3.28 ft.)
Metal Probe
P1618SV-1SR Side View Flexible- 01406 6 1m (3.28 ft.)
Obedient Probe
P16PIP Pipe & Duct Inspection 01578 0 28mm (1.1 in.) 22m (72 ft.) 0.4 in. (10mm) to infinity
Probe & Reel Set
14
Soft Metal
Articulating Probe
6mm (0.23 in.)
0.25 to 6 in.
(6.4 to 150mm)
0.25 to 6 in.
(6.4 to 150mm)
0.4 to 12 in.
(10 to 300mm)
3.9mm (0.15 in)
4.9mm (0.19 in)
5.5mm (0.22 in.)
5.5mm (0.22 in.)
Flexible-Obedient
Probe
Ultra-Slim Flexible-
Obedient Probe
Switchable Front/Side
View Flexible-
Obedient Probe
Soft Metal Probe