User Manual

User Guide

Interface AV out

Compression Format Compliant with MPEG4

Still Image Storage Format jpeg (640*480)

Frame Rate ~30 fps

Exposure Automatic

White Balance Fix

S/N Ratio 42dB or more

Language English // Japanese // Netherlands //

Spain // French // Italian

Recharge Temperature 32°F to 104°F

Working Temperature -4°F to 140°F

Storage Temperature -4°F to 140°F

Troubleshooting

1. Unable to turn on the console

Users will not be able to turn on the console when the battery is very low or empty. Please re-charge

before use.

•

2. Can turn on the unit but the image does not appear on the monitor

Please check the insert tube connector or simply re-connect the insert tube to correct the problem.

3. Unable to capture photos/video

Please check the status of the SD card. Users will not be able to capture photos or video if the SD card is

not installed properly or if it is full, write protected or damaged.

Insert Tube Maintenance

To avoid danger, please do not put the insert tube into any ammable liquid or gas.

The insert tube contains a series of small wires that control the optics and electronics of the camera tip.

To ensure long-term reliability, do not bend the insert tube more than 180 degrees, and always bend the

insert tube in as large an arc as possible during usage and storage.

Camera Lens cleaning

User may clean the camera lens with a cotton swab and small amount of cleaning naphtha

•