LOW VOLTAGE TESTER USER’S MANUAL CT102 Please read this manual carefully and thoroughly before using this product.
KEY FEATURES • Visual indication of AC or DC voltage • Versatile alligator clip leads with boots • ETL approved; safe for CAT I use • Double insulated housing and leads • Pocket clip on back SAFETY INSTRUCTIONS DANGER Electric Shock Risk Ꮨ Warning Ꮨ DANGER Electric Shock Risk To avoid possible electric shock or personal injury, and to avoid damaging the tester or the equipment being tested: • Do not use the CT102 in any way not detailed in this manual or the tester's safety features may be compromised.
damage. Use caution when detecting AC voltages above 42VACRMS. • Before using the tester, inspect the case. Do not use the CT102 if the case is damaged. Look for cracks or missing plastic. Pay particular attention to the insulation around the connectors. • Do not operate the tester around explosive gas, vapor, or dust. • When using the probes, keep your fingers behind the finger guards. Never touch the metal ends of the probes when making a measurement.
Warning: Attaching the clip leads across a 110V or 220V line will burn out the bulb, increasing the risk of shock, personal injury and equipment damage. SPECIFICATIONS Voltage Detection Range: 5 to 50V AC/DC Maximum Current: 5A Safety Rating: CAT I Lead Thickness: 20 AWG Operating Temperature: 41° to 104°F (5° to 40°C) @ <85%RH (decreasing linearly to <50%RH at 104°F/40°C) Weight: 0.6 oz.
certain restrictions, General will repair or replace this instrument if, after examination, the company determines it to be defective in material or workmanship. The warranty period begins on the date of purchase. You are encouraged to register your product online. General will extend your warranty an additional 60 days if you register at www.generaltools.com/ProductRegistry.
Acceptance of the exclusive repair and replacement remedies described herein is a condition of the contract for purchase of this product. In no event shall General be liable for any incidental, special, consequential or punitive damages, or for any cost, attorneys’ fees, expenses, or losses alleged to be a consequence of any damage due to failure of, or defect in any product including, but not limited to, any claims for loss of profits. Register now at www.generaltools.
RETURN FOR REPAIR POLICY Every effort has been made to provide you with a reliable product of superior quality.
GENERAL TOOLS & INSTRUMENTS 80 White Street New York, NY 10013-3567 PHONE (212) 431-6100 FAX (212) 431-6499 TOLL FREE (800) 697-8665 e-mail: sales@generaltools.com www.generaltools.com CT102 User’s Manual Specifications subject to change without notice ©2013 GENERAL TOOLS & INSTRUMENTS NOTICE - WE ARE NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS.
