Manual

Fig. 3. The receiver’s controls, indicators and jacks
햲 Nameplate
햳 Liquid-crystal display
햴 POWER button
햵 READ button. Main use is for recalling stored maximum and minimum
measurements. Secondary function (indicated by ▲ stencil at right of button) is for
adjusting settings of clock and alarm
햶 HOLD MAX-H button. Locks maximum measured value
햷 MAX. MIN. button. Main use is for entering maximum/minimum measurement
mode. Secondary function (indicated by stencil at right of button) is to change
digits of clock and alarm settings
햸 ALARM button
햹 CLOCK SET button
햺 SEARCH button. Main use is for enabling manual searching. Secondary function
(indicated by MUTE ALARM stencil below button) is to mute setpoint alarms.
햻 CHANNEL button
햽 USB jack
햾 PWR 3V
j
ack. For plugging in external 3VDC power supply
▲
14
RIGHT SIDE
CMR35 Manual FINAL4_020911:awb 2/9/11 11:54 AM Page 14