Manualshelf

Owner manual

ManualsBrandsGeneral Tools and Instruments ManualsTools860 v.2
12345678910
10. Make all cuts to the pins board. For those cuts, the router should ride on the surface
marked “cut pins this side” shown in FIG. 13 & 14. Be sure to follow the jig profile.
11. Dry fit the two sections together. If problems arise, file or trim the joint as needed.
FIG. 13
FIG. 14
860 Dovetailer Manual R4-120811_awb 12/8/11 3:07 PM Page 9