Installation Manual

Page 2 of 12
www.generalspecialtiesmfg.com
208-265-5244
Materials
Box #
Item
Box #1
Pivot Cap, hardware bag #1
Box #2
Crosspiece (1 of 2)
Box #3
Crosspiece (2 of 2)
Box #4
Center tube, telestrut and telestrut bracket, winch and pulley,
winch foundation and bracket, hardware bags #2-7 (for 12X
HD Custom, 15X, 18X) and bag #8 (for 12X HD or 12XHD
Custom with aluminum angle rails only, all others have
aluminum channel rails and don’t require these brackets)
Box #5
Longitudinal (1 of 2)
Box #6
Longitudinal (2 of 2)
Box #7
Box #8
Box #9
Rails: Either aluminum channel or angle depending on model
ordered (only 1 rail box for 12X HD. 2 rail boxes for 12X HD
custom. 3 boxes for 15X, 18X)
Hardware Packets:
Bag #1:
- For Pivot Cap
Bag #2:
- For Center tube to Crosspieces
Bag #3:
- For Crosspieces to Longitudinals
Bag #4:
- For Telestrut bracket to Longitudinals
Bag #5:
- For Winch to Winch Foundation and Winch bracket to post
Bag #6:
- For Longitudinals to Brackets/Rails
Bag #7:
- For Panels to Rails
- Instructions
Bag #8:
- For 12X HD & 12XHD Custom with angle rails only - brackets for Rails to Longitudinals