Installation Manual

Page 7 of 8
www.generalspecialtiesmfg.com
208-265-5244
Attach panel/rail assembly to the outside of the top
channel brackets as shown.
Attach braces to bottom of panel rails as
shown.
Note in Fig. B, the bottom
channel has been moved
farther up the post than in
Fig. A to achieve a more
horizontal adjustment for
the panel.
In order to adjust the panel to a more vertical orientation, refasten braces to bottom channel brackets as
desired. And if you want to adjust your panel dead vertical, remove braces entirely and position bottom
channel so holes in bottom channel bracket line up with holes in the bottom of the rail.
Fig. A
Fig. B