User's Manual

20-527 Owner’s Manual Draft
Page 47 of 60
2. Press FUNC. Then L/OUT. The locked out ID appears. If the ID memory bank has no locked-out ID,
you hear the low beep tone.
Clearing Talk Group IDs
1. Press PGM then TRUNK.
2. Press FUNC, ^ or v to select ID memory.
3. Press FUNC then CL.
Clearing All Talk Group IDs in One Bank
You can clear all talk group IDs within a bank. This lets you quickly delete all talk group IDs from a bank if
you want to use the bank to store different data (such as a new set of talk group IDs).
1. Press PGM.
2. Press TRUNK to enter a talk group ID memory mode.
3. Select a talk group ID bank using FUNC, ^ or v.
4. Press FUNC then 6. Clear entire list ? Press 1 to clear all, any other key aborts appears.
5. Press 1 to clear all talk group IDs within a bank. List cleared. appears.
To cancel the deletion, press any key except 1. The scanner returns to the talk group ID memory mode.
Changing the Open/Closed Mode
1. Press MANUAL.
2. Press FUNC then ^ or v to select the channel storage bank.
3. Press FUNC then ./DELAY. Bank OPEN. or Bank CLOSED. appears. After that message disappears,
the fifteenth digit on the second line of the display changes from + to – or vice versa.
Add illust
4. Repeat Steps 2 and 3 for each bank.