User's Manual

20-527 Owner’s Manual Draft
Page 31 of 60
example, to turn off bank 1, press 1. The scanner does not scan any of the channels within the banks you
turned off.
Add illust
To turn on banks while scanning, press the number key until the bank’s number appears. For example to
turn bank 1 on again, press 1.
Notes:
• You cannot turn off all banks. There must be at least one active bank.
• You can manually select any channel in a bank, even if the bank is turned off.
Deleting Frequencies from Channels
1. Press MANUAL.
2. Use the number keys to enter the channel with the frequency you want to delete.
3. Press MANUAL again.
4. Press PGM to enter the program mode. M changes to P.
5. Press FUNC.
6. Press CL. The frequency number changes and 0.0000 appears.
Deleting All Frequencies into a Channel Bank
1. Press PGM.
2. Press FUNC then ^ or v to select the bank you cleared.
3. Press FUNC then 1. Bank X selected. Fn+CLR to delete all frequencies. TEXT to edit tag appears.
4. Press FUNC then CL. Clear entire bank? Press 1 to clear all, any other key aborts appears.
5. Press 1 to clear the selected bank’s all channel memory. please stand by. appears. Press any other
than 1 to cancel clear.
SPECIAL FEATURES