User's Manual

20-527 Owner’s Manual Draft
Page 21 of 60
6 then FUNC m n o
7 P Q R S
7 then FUNC p q r s
8 T U V
8 then FUNC t u v
9 W X Y Z
9 then FUNC w x y z
0 . - # _ @ + * & / ‘
0 then FUNC $ % ! ^ ( ) ? ~ ‘ ^
•/DELAY Space
CL Back Space
Finding and Storing Active Frequencies
You can search for transmissions in the scanner’s preprogrammed search bank. The search bank is
divided into seven search bands. You can change the search range of Bank SR6 manually by setting the
lower and higher ends of the search range.
Notes:
• You can use the scanner’s delay feature while searching the search bank. See “Using the Delay
Function” on Page XX.
• The scanner does not search locked-out frequencies while searching ranges. See “Locking Out
Channels or Frequencies” on Page XX.
Searching a Preprogrammed Frequency Range
The scanner contains these preprogrammed search ranges, stored in the search bank (SR0-SR6).
Bank Band
SR0......................................... Marine
SR1..........................................CB
SR2……………………………..FRS/GMRS/MURS
SR3 ........................................ Police/Fire
SR4..........................................Aircraft
SR5.......................................... Amateur Bands
SR6......................................... Limit search (User changeable)
Follow these steps to select preprogrammed search bands and search them for active frequencies:
1. Repeatedly press SEARCH to select your desired search bank (SR0, SR1, SR2, SR3, SR4, SR5, or
SR6).