User's Manual

20-527 Owner’s Manual Draft
Page 20 of 60
2. Press TRUNK.
3. Press FUNC then ^ or v to select the desired bank.
4. Press TRUNK to select the desired sub-bank.
5. Press or hold down ^ or v to select the desired group ID.
6. Press TEXT then enter the tag using the keypad. (See “Finding and Storing Active Frequencies” on
Page XX).
7. Press ENTER to store.
Assigning a Text Tag to a Bank
1. Press FUNC then press bank number. Bank X (0 through 9) selected. Fn+CLR to delete all
frequencies, TEXT to edit tag appears..
2. Press TEXT, then enter the text using the keypad.
3. Press ENTER to store.
Test Input Chart
Notes:
• To access the numbers, after you press TEXT (when you assign the text tag to a channel) or you press
FUNC and bank number (when you assign the text tag to a bank), press 1. Then press the desired
number you want to enter.
• To enter lowercase character or a character from the second set for the key 0, press FUNC after
pressing the first numeral key.
PRESSED CHARACTERS
1 0 1 2 3 4 5 6 7 8 9
2 A B C
2 then FUNC a b c
3 D E F
3 then FUNC d e f
4 G H I
4 then FUNC g h I
5 J K L
5 then FUNC j k l
6 M N O