User's Manual

condition are copied on the channel. After about 2 seconds, the scanner

automatically returns to search mode.

Note

• If you try to copy a frequency that is already stored, the scanner sounds the notice

tone 3 times after you press ENTER. Dupl.F Chxxx appears at the bottom lime. If

you want to copy the duplicate frequency anyway, press ENTER, r if not, press CLR

to cancel.

Coping a Frequency into the Priority Channel

You can copy a frequency into the priority channel (see “Programming the Priority

Channel” on Page 35) when the scanner stops on the frequency during Search, Scan,

Manual, Tune, or WX mode.

Press FUNC then PRI when the frequency is on the display. The display flashes twice

and the frequency is copied to the priority channel.