User's Manual

47
Space is entered by pressing ./DELAY.
“C” is the third letter associated with 2 on the keypad. Press 2 then 3.
“h” is the second letter associated with 4 on the keypad. Press 4 then FUNC (for the
lower case set), then press 2.
Space is entered by pressing ./DELAY.
“6” is the sixth number associated with 1 on the keypad. Press 1 then 6.
5. Press ENTER to store the text with the channel.
Assigning a Text Tag to a Group ID
1. Press PGM.
2. Press TRUNK.
3. Press FUNC then π or θ to select the desired bank.
4. Press TRUNK to select the desired sub-bank.
5. Press or hold down π or θ to select the desired group ID.
6. Press TEXT then enter the text using the numeral keys (see “Te xt Input Chart” on
Page 48). Use π, θ, or CLR to edit your entry, or press and hold CLR to abort the text
entry.
Press ENTER to store the text with the ID.
Assigning a Text Tag to a Channel Storage Bank
1. Select a channel within the desired channel storage bank by pressing MAN and
entering the channel storage bank number (000 for bank 0 or 200 for bank 2, for
example). Press MAN again.
2. Press PGM.