User's Manual

2. Press FUNC then π or θ to select the desired bank.

3. Press FUNC, then press 8. Block 0 size code. Use 15 for type II. S-00

is displayed.

4. Enter the size code supplied with the Type I system information, referring to the

prompts that appear in the display. If the information for your Type I system is not

available, try the following common fleet maps:

Block

Size Code

1 2 3 4 5 6 7 8

0 S11 S4 S4 S12 S4 S3 S10 S1

1 S11 S4 S4 — S4 S10 S10 S1

2 S11 S4 S4 S4 S12 S4 S11 S2

3 S11 S4 S4 S4 — S4 S4 S2

4 S11 S4 S4 S4 S4 S12 S4 S3

5 S11 S4 S4 S4 S4 — S4 S3

6 S11 S4 S12 S4 S4 S12 S4 S4

7 S11 S4 — S4 S4 — S4 S4

Block

Size Code

9 10 11 12 13 14 15 16

0 S4 S0 S4 S0 S3 S4 S4 S3

1 S4 S0 S0 S0 S3 S3 S4 S10

2 S0 S0 S0 S0 S11 S10 S4 S10

3 S0 S0 S0 S0 S4 S4 S11 S11

4 S0 S0 S0 S0 S4 S4 S11 S0

5 S0 S0 S0 S0 S0 S4 S0 S0

6 S0 S4 S0 S0 S0 S12 S12 S12

7 S0 S4 S0 S4 S0 — — —

Press ENTER for each entry. If you make a mistake, press CLR and enter the correct

size code.