User's Manual

114
Search Mode
Keystrokes Function Page
SCAN Activates Scan Mode 49
MAN Activates Manual Mode 50
PGM Activates Program Mode 30
WX Activates Weather Mode 63
PRI Toggles priority 40
TUNE Enters Tune Mode 60
ATT
Toggles attenuation for active search range, or, if global attenuation is set,
toggles global attenuation on or off
68
L/OUT Locks out undesired search frequencies or search channels 66
PAUSE Pauses and resumes search operations 52
MODE Cycles through AM/FM/CT/DC modes for selected search range 52
SRCH Steps through the available search ranges 52
DECIMAL POINT Toggles delay on or off in selected search range or search channel 52
π or θ Changes search direction 52
FUNC + MAN Toggles digital AGC 78
FUNC + PRI
When searching SR1to SR6, stores active search frequency in priority
memory
41
FUNC + TUNE
When searching SR3, SR4, SR5 and SR6, stores active search frequency
in tune memory
60
FUNC + ATT Toggles attenuator mode, normal or global 68
FUNC + L/OUT
In SR0, SR1, SR2, steps to next locked out search channel, must be in “M”
state. In SR3, SR4, SR5 and SR6, enters Search Lockout Review, use
arrow keys to review locked frequencies, use CLR to clear locked
frequencies, use FUNC + 6 to clear all locked frequencies
67
FUNC + MODE Sets mode to default for active search range 52
FUNC + SRCH
Toggles Manual Channel Select or Search Channels for SR0, SR1 and
SR2
52
FUNC + PGM
When searching SR3, SR4, SR5 and SR6, stores active search frequency
in desired bank and channel (e.g., “123 + ENTER” stores the active
frequency in Bank 1, Channel 23)
61
FUNC + ENTER
When searching SR3, SR4, SR5 and SR6, stores active search frequency
in next available channel in desired bank (e.g., “1 + ENTER” stores active
frequency in next empty channel in Bank 1)
61
FUNC + 7 Toggles Seek on or off 59
FUNC + 0 Toggles Zeromatic on or off 59