User's Manual

113
Program Mode
Keystrokes Function Page
SCAN Activates Scan Mode 49
MAN Activates Manual Mode 50
PGM Increments to the next channel memory 30
WX Activates Weather Mode 63
PRI Selects priority channel for programming 40
TEXT Edits text tag for selected channel 46
TRUNK Enters ID List Edit for the selected bank 38
TUNE Enters Tune Mode 60
ATT
Toggles attenuation for selected channel, or, if global attenuation is set,
toggles global attenuation on or off
68
L/OUT Toggles lockout on the selected channel 65
MODE
Cycles through valid modes for the selected channel, clears any stored CT
or DC settings
18
SRCH Sets search range for programmable search range (PSR) 52
2, 3, PGM Jumps to channel 23 in the current bank 30
1, 2, 3, PGM Jumps to bank 1, channel 23 30
DECIMAL POINT Toggles delay on selected channel on or off 65
<frequency> ENTER Enters a frequency into channel memory 30
π or θ
π steps to the next channel, θ steps to the previous channel, hold down to
scroll
30
FUNC + MAN Toggles digital AGC 78
FUNC + MODE If selected channel mode is set to CT or DC, edits CT or DC code 30
FUNC + PRI Stores the frequency of the selected channel into the priority channel 41
FUNC + TUNE
Stores the frequency of the selected channel frequency into the tune
memory
60
FUNC + ATT Toggles attenuator mode, normal or global 68
FUNC CLR Clears all programming data in selected channel 30
FUNC + 5 Toggles open or closed mode for current bank 83
FUNC + 7 Edits bank text tag 47
FUNC + L/OUT Jumps to the next locked out channel 66
FUNC + TEXT Edits welcome screen line 4 (stored with V-Scanner as folder name) 71
FUNC + PROGRAM Enters V-Scanner function menu 71
FUNC + π or θ
π jumps forward to the next bank, θ jumps to the previous bank, hold down
to scroll
30