User's Manual

20-496 Owner’s Manual Draft Page 78/78
FUNC + 2 Base/offset/step table entry for Motorola, toggles AFS or Decimal display for
EDACS.
FUNC + 3 Motorola 3600 control channel mode select.
FUNC + 4 Motorola/P25 9600 control channel mode select.
FUNC + 6 Clears all ID entries in current ID list.
FUNC + 8 Sets Motorola Type I fleetmap.
FUNC + L/OUT Jumps to the next locked out ID.
FUNC + TRUNK Launches ID hold mode on selected ID.
FUNC + ^ or v ^ jumps forward to the next ID bank, v jumps to the previous ID bank. Hold down
to scroll.
Startup keys
(Enter during welcome screen display.)
Keystrokes Function
1 Turns key tones on.
2 Turns key tones off.
3 Displays CPU, DSP application and DSP decoder versions.
0 then 1 Destructive - Initializes working memory to factory defaults. Does not affect
V-Scanner memory.
0 then 2 Destructive - Loads test frequencies into working memory. Does not affect
V-Scanner memory.
0 then 5 Destructive / EEPROM memory test #1 - Initializes working memory. Does not affect
V-Scanner memory.
0 then 6 Destructive / EEPROM memory test #2 - Initializes working memory. Does not affect
V-Scanner memory.
0 then PROG Upgrade DSP application firmware.
0 then TEXT DSP factory tests
0 then CLEAR Destructive - Reverts to factory DSP application version, any DSP upgrades are
lost.
WARRANTY & ADDRESS & DATE CODE