Manualshelf

User's Manual

ManualsBrandsGeneral Research of Electronics ManualsElectronicsScanning Receiver
69707172737475767778
20-496 Owner’s Manual Draft Page 76/78
FUNC + TUNE When searching SR3, SR4, SR5 and SR6, stores active search frequency in tune
memory.
FUNC + ATT Toggles attenuator mode, normal or global.
FUNC + L/OUT In SR0, SR1, SR2, steps to next locked out search channel, must be in “M” state.
In SR3, SR4, SR5 and SR6, enters Search Lockout Review. Use arrow keys
to review locked frequencies, use CLEAR to clear locked frequencies, use
FUNC + 6 to clear all locked frequencies.
FUNC + MODE Sets mode to default for active search range.
FUNC + SRCH Toggles Manual Channel Select or Search Channels for SR0, SR1 and SR2.
FUNC + PROG When searching SR3, SR4, SR5 and SR6, stores active search frequency
in desired bank and channel (e.g., “123 + ENT” stores the active frequency
in Bank 1, Channel 23).
FUNC+ENT When searching SR3, SR4, SR5 and SR6, stores active search frequency in next
available channel in desired bank (e.g., “1 + ENT” stores active frequency in
next empty channel in Bank 1).
FUNC + 7 Toggles Seek on or off.
FUNC + 0 Toggles Zeromatic on or off.
Weather Mode
Keystrokes Function
SCAN Activates Scan Mode.
MAN Activates Manual Mode.
PROG Activates Program Mode.
WX Steps to next weather channel.
FUNC + WX, Weather alert alarm demonstration. Press any key (except DIM) to exit.
and then hold
WX
TUNE Enters Tune Mode.
ATT Toggles attenuation for selected weather frequency, or, if global attenuation is set,
toggles global attenuation on or off.
SRCH Enters Search Mode.
NUMBER KEYS Quick FIPS code review for FIPS memories 0-9. Press L/OUT to toggle
0-9 lockout status.
FUNC + PRI Stores active weather frequency in priority memory. Press PRI in Scan, Search,
Manual, Program modes to activate WX Priority.
FUNC + ATT Toggles attenuator mode, normal or global.
FUNC + PROG FIPS code entry - Use ^ or v to scroll, key in FIPS code + ENT to store. Press
L/OUT to toggle lockout of FIPS code, press TEXT and enter text label for FIPS
memory. Press WX to exit.
FUNC + WX Activates FIPS/SAME weather alert mode. Press FUNC + WX to exit.
Tune Mode