User's Manual

20-496 Owner’s Manual Draft Page 75/78
MODE Cycles through valid modes for the selected channel, clears any stored CT or
DC settings.
SRCH Sets search range for programmable search range (PSR).
2, 3, PROG Jumps to channel 23 in the current bank.
1, 2, 3, PROG Jumps to bank 1, channel 23.
DECIMAL POINT Toggles delay on selected channel on or off.
<frequency> Enters a frequency into channel memory.
ENT
^ or v ^ steps to the next channel, v steps to the previous channel, hold down to scroll.
FUNC + MAN Toggles digital AGC.
FUNC + MODE If selected channel mode is set to CT or DC, edits CT or DC code.
FUNC + PRI Stores the frequency of the selected channel into the priority channel.
FUNC + TUNE Stores the frequency of the selected channel frequency into the tune memory.
FUNC + ATT Toggles attenuator mode, normal or global.
FUNC CLEAR Clears all programming data in selected channel.
FUNC + 5 Toggles open or closed mode for current bank.
FUNC + 7 Edits bank text tag.
FUNC + L/OUT Jumps to the next locked out channel.
FUNC + TEXT Edits welcome screen line 4 (stored with V-Scanner as folder name).
FUNC + PROG Enters V-Scanner function menu.
FUNC + ^ or v ^ jumps forward to the next bank, v jumps to the previous bank. Hold down to
scroll.
Search Mode
Keystrokes Function
SCAN Activates Scan Mode.
MAN Activates Manual Mode.
PROG Activates Program Mode.
WX Activates Weather Mode.
PRI Toggles priority.
TUNE Enters Tune Mode.
ATT Toggles attenuation for active search range, or, if global attenuation is set,
toggles global attenuation on or off.
L/OUT Locks out undesired search frequencies or search channels.
PAUSE Pauses and resumes search operations.
MODE Cycles through AM/FM/CT/DC modes for selected search range.
SRCH Steps through the available search ranges.
DECIMAL Toggles delay on or off in selected search range or search channel.
POINT
^ or v Changes search direction.
FUNC + MAN Toggles digital AGC.
FUNC + PRI When searching SR1 to SR6, stores active search frequency in priority memory.