User's Manual

20-496 Owner’s Manual Draft Page 74/78
MAN Increments to the next channel memory.
PROG Activates Program Mode.
WX Activates Weather Mode .
PRI Toggles priority.
TUNE Enters Tune Mode.
ATT Toggles attenuation for selected channel, or, if global attenuation is set, toggles
global attenuation on or off.
L/OUT Toggles lockout on the selected channel.
MODE Cycles through valid modes for the selected channel, clears any stored CT or
DC settings.
SRCH Activates Search Mode.
2, 3, MAN Jumps to channel 23 in the current bank.
1, 2, 3, MAN Jumps to bank 1, channel 23.
DECIMAL Toggles delay on selected channel on or off.
POINT
PAUSE Activate Scan Mode.
ENT When monitoring a conventional channel that is programmed for CT or DC Search
Mode, stores a detected CT or DC code with the channel memory.
^ or v ^ steps to the next channel, v steps to the previous channel. Hold down to scroll.
FUNC + MAN Toggles digital AGC.
FUNC + TRUNK Enters trunked ID list for current bank.
FUNC + PRI Stores the frequency of the selected channel into the priority channel.
FUNC + TUNE Stores the frequency of the selected channel frequency into the tune memory.
FUNC + ATT Toggles attenuator mode, normal or global.
FUNC + 5 Toggles open or closed mode for current bank.
FUNC + 9 Adjust display contrast, use ^ or v then ENT.
FUNC + L/OUT Jumps to the next locked out channel.
FUNC + ^ or v ^ jumps forward to the next bank, v jumps to the previous bank. Hold down to scroll.
Program Mode
Keystrokes Function
SCAN Activates Scan Mode.
MAN Activates Manual Mode.
PROG Increments to the next channel memory.
WX Activates Weather Mode.
PRI Selects priority channel for programming.
TEXT Edits text tag for selected channel.
TRUNK Enters ID List Edit for the selected bank.
TUNE Enters Tune Mode.
ATT Toggles attenuation for selected channel, or, if global attenuation is set, toggles
global attenuation on or off.
L/OUT Toggles lockout on the selected channel.