User's Manual

20-496 Owner’s Manual Draft Page 6/78
Text Input — lets you input a text label for each channel, talkgroup ID, channel storage bank, or other
memory location so you can easily identify the transmission.
Lock Out Function — lets you set your scanner to skip over specified channels or frequencies when
scanning or searching, and skip over IDs when tracking trunked systems.
Key Lock — lets you lock the scanner's keys to prevent accidentally changing the scanner's programming.
DIN-E Size Cabinet
Memory Backup — keeps the channel frequencies stored in memory for an extended time even without
battery power.
Your scanner can receive these frequencies:
. 25 – 54 MHz
. 108 – 136.9875 MHz
. 137 – 174 MHz
. 216.0025 – 225 MHz
. 406 – 512 MHz
. 806 – 823.9875 MHz
. 849 – 868.9875 MHz
. 894 – 960 MHz
. 1240 – 1300 MHz
Use “A General Guide To Frequencies” on Page XX to help you target frequency ranges in your service
area so you can search for a wide variety of transmissions.
THE FCC WANTS YOU TO KNOW
This equipment has been tested and found to comply with the limits for a scanning receiver, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.