User's Manual

20-496 Owner’s Manual Draft Page 48/78
will display:
LCD illustration (same as 20-526)
Press ENT to accept the choice, another number key to change your selection, or CLEAR to abort and
return to the V-Scanner menu. The scanner gives you one final opportunity to abort before proceeding:
LCD illustration (same as 20-526)
While loading, the scanner will display:
LCD illustration (same as 20-526)
The contents of the scanner’s current working memory will be replaced with the data from the selected
V-Scanner folder.
5. To delete the contents of a V-Scanner folder, select 3. The scanner will display:
LCD illustration (same as 20-526)
Press the number key that corresponds with the V-Scanner folder you wish to clear, or press CLEAR to
return to the V-Scanner menu. If you select a V-Scanner folder, the scanner will display the name of the
V-Scanner currently stored in that folder, and prompt you to verify your choice. For example, if you choose
V-Scanner Folder 1, the scanner will display:
LCD illustration (same as 20-526)
Press ENT to accept the choice, another number key to change your selection, or CLEAR to abort and
return to the V-Scanner menu. The scanner gives you one final opportunity to abort before proceeding:
LCD illustration (same as 20-526)
While the folder is being cleared, the scanner will display
LCD illustration (same as 20-526)
This display appears after each V-Scanner operation. Pressing ENT will return to the main V-Scanner
menu. Press CLEAR to exit the V-Scanner main menu.
LCD illustration (same as 20-526)
This display appears if a failure is encountered while performing a V-Scanner operation. Press ENT to try
again.