User's Manual

20-496 Owner’s Manual Draft Page 29/78
For example, to identify a channel as “FIRE Ch 6” (for “Fire Channel 6”):
“F” is the third letter associated with 3 on the keypad. Press 3, and then 3.
“I” is the third letter associated with 4 on the keypad. Press 4, and then 3.
“R” is the third letter associated with 7 on the keypad. Press 7, and then 3.
“E” is the second letter associated with 3 on the keypad. Press 3, and then 2.
Space is entered by pressing ./DELAY.
“C” is the third letter associated with 2 on the keypad. Press 2, and then 3.
“h” is the second letter associated with 4 on the keypad. Press 4, and then FUNC (for the lower case
set),and then press 2.
Space is entered by pressing ./DELAY.
“6” is the sixth number associated with 1 on the keypad. Press 1, and then 6.
5. Press ENT to store the text with the channel.
Assigning a Text Tag to a Group ID
1. Press PROG.
2. Press TRUNK.
3. Press FUNC then ^ or v to select the desired bank.
4. Press TRUNK to select the desired sub-bank.
5. Press or hold down ^ or v to select the desired group ID.
6. Press TEXT then enter the text using the numeral keys (see “Text Input Chart” on Page XX). Use ^, v, or
CLEAR to edit your entry, or press and hold CLEAR to abort the text entry.
7. Press ENT to store the text with the ID.
Assigning a Text Tag to a Channel Storage Bank