User's Manual

20-405 User’s Guide DRAFT
appear.
2. Enter the frequency you want stored in the priority channel, then press ENT.
To turn on the priority feature, press PRI/ALERT during scanning or searching. PRI appears. The
scanner checks the priority channel every two seconds and stays on the channel if there is activity.
To turn off the priority feature, press PRI/ALERT. PRI disappears.
To program a weather channel as the priority channel, see “Receiving All Weather Alerts” on page
XX.
Turning the Key Tone On and Off
The scanner is preset to sound a tone each time you press one of its keys.
To turn the key tone on and off.
1. If the scanner is on, turn it off then back on again.
2. WELCOME SCAnnInG rECEIVEr appears.
3. While the welcome message is on the screen, press 1 to turn on the key tone or press 2 to turn it
off.
Additional Information
Cloning the Programmed Data
You can transfer the programmed data to and from a PRO-405 scanner using an optional connecting
cable with 1/8-inch (3.5mm) stereo phone plugs on both ends (available from your local RadioShack
store or www.RadioShack.com
).
1. Turn on both scanners.
2. Connect the connecting cable to each scanner’s PC/IF jack. CLOnE and UP to SEnd appears.
3. Press UP on the host scanner.
Page 24