User's Manual

20-405 User’s Guide DRAFT
Marine Service Bank
1. Press PSE during the Marine Service Bank search.
2. Press UP or DOWN to select channels manually. L/O appears next to locked-out channels.
3. To remove the lock-out, press L/O until L/O disappears.
Other Service Banks
1. Hold down L/O/L/O RVW for about two seconds during a Service Bank search.
2. Press UP or DOWN repeatedly to scroll through the list of locked-out frequencies. L-r and L/O
appear in the display.
3. Press L/O to remove the lock-out. The list scrolls to the next locked-out frequency.
Notes:
• When you reach the highest locked-out frequency, the scanner beeps twice and rolls to the lowest
locked-out frequency.
• If the Service Bank has no locked-out frequencies, EMPty appears.
Removing Lock-outs from All Frequencies in a Service Bank
1. Hold down L/O/L/O RVW for about two seconds during a Service Bank search. L-r appears.
2. While holding down TUNE/CLEAR, press L/O. FLo ALL-CL appears for about two seconds. Then
the display alternates with YES –––Ent and No ––CLEAr.
3. Press ENT. L-r EMPty appears. The scanner clears lock-outs from all frequencies in the Service
Bank.
Using Priority
The priority feature sets the scanner to check one channel every two seconds while scanning. You
can program one frequency into the priority channel.
1. Press PGM, then press PRI/ALERT. PCH and 000.0000 or the previously stored frequency
Page 23